Falcom Modem A2D-1 setup for Microsoft Windows ME

Some notes before we start:

• No special modem drivers are needed for this setup.

• Some settings are per default preset, just check to have it correct.

• Use the SIM card with PIN disabled.

Step 1:

1. Start 2. Settings 3. Control Panel

Step 2:

4. Modems

Step 3:

5. Add...

Step 4:

6. Don't detect my modem: I will select it from a list. 7. Next >

Step 5:

8. Standard Modem Types 9. Standard 9600 bds Modem 10. Next >

Step 6:

Select a serial port for the modem. 11. Communication Port (COM1) 12. Next >

Step 7:

13. Finish The modem is now installed.

Step 8:

14. Standard 9600 bps Modem 15. Properties

Step 9:

16. Maximum speed -> 9600 17. OK 18. Close

Step 10:

The modem is now configured to be used like any other modems.

Please remember, because of the packet transmission, the modem behavier is slight different against wired modems.

Some packets may have delays up to 500 ms.

[Home] - Copyright © 1999-2002 by BonusData AG, webmaster@bonusdata.net. Last update: 30.04.2002